"The network could not publish your post. Please see the following guide."

[Blog2Social Support]

Hello Chris,

Thanks for your response.

I think there’s a misunderstanding. When uploading an image from your WordPress media library, your image also contains a URL. You can check the URL by selecting an image in the menu on the right side.

Therefore, I would recommend checking your image URL and making sure that the image is retrievable. Please also make sure that your image is in “jpg” or “png” format and fits the requirements of your connected accounts.
What is the best image size for my social media posts?

If you are still facing issues afterwards, please send me the image URL where you are facing issues so I’m able to take a closer look.

Best regards

Benedikt

[Chris Packert]

Hi Benedikt,

When using the Blog2Social Image Post, the image is uploaded directly to the post and is not presented through a url. Can we jump on a Zoom call to troubleshoot? I have included screenshots of the process of posting using the "Share an Image" option. As you can see in the results, all API's have made a connection, but the posts are not delivered.

Thanks,

Chris

[Blog2Social Support]

Hello Chris,

Thanks for your patience.

When checking your notifications with our IT-experts we received the following error from Facebook, Instagram, LinkedIn and Google:
URL should represent a valid URL

It seems that this is caused by the URL of your image since the social media networks cannot retrieve this information properly. Please be so kind as to make sure that your image URL is valid and retrievable so your posts can be shared correctly.

Please let me know if it works out or if you have further questions.

Best regards

Benedikt

[Blog2Social Support]

Here is the screenshot.

Hello Chris,

Thanks for your reply.

I would recommend increasing your website's execution time to 400 instead of 90.

In addition, we’re currently checking your provided screenshot with our IT-experts.

Best regards

Benedikt

[Chris Packert]

Here is the screenshot.

[Chris Packert]

Hi Benedikt, Here is the screenshot you requested (in next post since comments don't allow image uploads). Also, the Memory limit was set to 512 and execution time is set to the max possible setting at 90. Please note that before I upgraded to the Pro version yesterday, everything was working fine. Is it possible to jump on a phone call to work this out?

[Blog2Social Support]

Hello,

Blog2Social has been working great for us until today. I just paid for the Pro version and tried to make an image post to all of our social media channels and got the following error on all fronts. I worked with In-Motion Hosting for about an hour and we both could not troubleshoot the issue. I went through all of the guides to troubleshoot issues to no end. Networks were all disconnected and then reconnected, text length was appropriate, image was the right size, etc. PLEASE HELP!

Hello Chris,

Thanks for reaching out.

I could imagine that this is caused by a slow server and results in a server-side timeout. Therefore, you can try adjusting your website's memory limit to 512M and your execution time to 400.

If you are still facing issues afterwards, it would be helpful if you could send me a screenshot of your notification details. You will find notifications by following this path:
“Social Media Posts” -> “Notifications” -> “Details”

I’m looking forward to your reply.

Best regards

Benedikt

[Chris Packert]

Hello,

Blog2Social has been working great for us until today. I just paid for the Pro version and tried to make an image post to all of our social media channels and got the following error on all fronts. I worked with In-Motion Hosting for about an hour and we both could not troubleshoot the issue. I went through all of the guides to troubleshoot issues to no end. Networks were all disconnected and then reconnected, text length was appropriate, image was the right size, etc. PLEASE HELP!

[Blog2Social Support]

I am having an issue with the Facebook post. Please help. I am already authorized the page.

Hello,

Thanks for reaching out.

As far as I can see in your screenshot you’re receiving the message “The network has blocked your account”.
Please be so kind as to make sure that your Facebook account is available. Therefore, I would recommend logging in on Facebook and checking your account.

Please let me know if you have further questions.

Best regards

Benedikt

[Arijit Banerjee]

I am having an issue with the Facebook post. Please help. I am already authorized the page.

[Blog2Social Support]

I was having to refresh the connection daily to get it to work but today, refreshing isn't helping. The issue has returned.

Hello,

Thank you for your reply and this feedback.

From the Blog2Social side nothing has changed in the plugin, also there is no known general bug or issue regarding Pinterest.

In case renewing does not resolve this behavior, please be so kind as to remove your connection via the networks overview in Blog2Social completely and connect it once again and retry the process. There is no other setting or option that could be adjusted in Blog2Social. Also, a similar behavior could not be reproduced on multiple neutral and clean environments.

Thank you for your understanding and your effort.

Best regards
Alexander

[extinctdisney]

Hello,

Thank you so much for your reply and this feedback.
I am so happy to hear that the occurring behavior seems to be resolved now.

Please feel free to let me know if you have any other questions or suggestions about Blog2Social.
I will gladly support you further.

If you like Blog2Social and our support, we would greatly appreciate a 5-star rating on WordPress.org.
Link: https://wordpress.org/support/plugin...iews/?filter=5

Best regards
Alexander

I was having to refresh the connection daily to get it to work but today, refreshing isn't helping. The issue has returned.

[Blog2Social Support]

Refreshing/Renewing the connection seems to have worked.

Hello,

Thank you so much for your reply and this feedback.
I am so happy to hear that the occurring behavior seems to be resolved now.

Please feel free to let me know if you have any other questions or suggestions about Blog2Social.
I will gladly support you further.

If you like Blog2Social and our support, we would greatly appreciate a 5-star rating on WordPress.org.
Link: https://wordpress.org/support/plugin...iews/?filter=5

Best regards
Alexander

[extinctdisney]

Hello,

Thank you for reaching out and thanks for describing your request.

Please be so kind as to try renewing your connection via the networks overview in Blog2Social and retry the process.
In case this fails please be so kind as to remove your connection from the networks overview and connect it once again afterward and retry the process.

Thank you for your understanding and your effort.
I am looking forward to your reply.

Best regards
Alexander

Refreshing/Renewing the connection seems to have worked.

[Blog2Social Support]

It had been working perfectly but this morning, as I made my first posts with 7.1.1, it has once again failed with " We don't have the permission to publish your post. Please check your authorization."

Hello,

Thank you for reaching out and thanks for describing your request.

Please be so kind as to try renewing your connection via the networks overview in Blog2Social and retry the process.
In case this fails please be so kind as to remove your connection from the networks overview and connect it once again afterward and retry the process.

Thank you for your understanding and your effort.
I am looking forward to your reply.

Best regards
Alexander